AN 4. Potentiostat stability - Electrochemistry & Battery. Electrochemistry
Looking for something?
Results in
Document.
The mystery of potentiostat stability explained (Potentiostat stability) Battery – Application Note 4
Essential Potentiostat Range
Brochure detailing the full Essential range of BioLogic potentiostat / galvanostats
Instrument & Quartz Crystal Microbalance (QCM) coupling: Mass measurement during polypyrrol film deposition Electrochemistry – Application Note 13
AN13. eQCM - Electrochemistry. Electrochemistry
Interpretation problems of impedance measurements on time variant systems Battery & Corrosion – Application Note 55
AN55. EIS stationarity - Electrochemistry, Battery & Corrosion. Electrochemistry
Sensor pulsed techniques: SWV, DPV & NPV Electroanalysis & Electrochemistry Sensor – Application Note 67
AN67. Sensor pulsed techniques: SWV, DPV & NPV Electrochemistry.
The modified inductance element $L_\text a$ Battery – Application Note 42
AN42. Battery-EIS modified inductance element. Electrochemistry
Supercapacitor characterization by galvanostatic polarization method (DC characterizations) Supercapacitor – Application Note 51
AN51. DC characterizations - Supercapacitor. Electrochemistry
Sweep scan with Height Tracking Scanning Probes – Application Note 26
The characterization of Vanadium Redox Battery Cells using BioLogic BCS-815 battery cyclers & a Pinflow® 20 cm² test cell.
Protocols for studying intercalation electrodes materials- I: Galvanostatic cycling/potential limitations (GCPL) GITT Battery – Application Note 1
AN 1. GITT - Electrochemistry & Battery Application. Electrochemistry
Achieving micron scale measurements using the SECM150 Scanning Probes – Application Note 18
AN18. Achieving micron scale measurements. Scanning Probe Electrochemistry.
How to read EIS accuracy contour plots Electrochemistry & Battery – Application Note 54
AN54. EIS contour plot. Electrochemistry
Precautions for good impedance measurements (EIS) Battery & Electrochemistry – Application Note 5
AN5. EIS precautions - Electrochemistry & Battery. Electrochemistry
How to interpret lower frequencies impedance in batteries (EIS low frequency diffusion) Battery – Application Note 61
AN61. EIS low frequencies diffusion - Battery. Electrochemistry
Levich and Koutecký-Levich analysis tools: Electrochemical reaction kinetics measurement Kinetics – Application Note 56
AN56. Levich Koutecky Levich. Electrochemistry
Protocols for intercalation electrodes materials-2, Potentiodynamic Cycling/Galvanostatic Acceleration (PCGA) PITT Battery – Application Note 2
AN 2. PITT - Electrochemistry & Battery. Electrochemistry
CASP: a new method for the determination of corrosion parameters (CASP Rp determination) Corrosion – Application Note 37
AN37. CASP Rp determination. Electrochemistry
Graphical and analysis tools in M370/M470 software Scanning Probes – Application Note 8
Application Note 8. AN 8. Scanning Probe Electrochemistry.
Measurement of non-photochemical quenching using the JTS-150 pump probe spectrometerPhotosynthesis – Application Note 5
This application note describes how to measure non-photochemical quenching using the JTS-150 pump probe spectrometer
Application of the bipotentiostat to an experiment with a Rotating Ring-Disk Electrode (RRDE bipot) Battery – Application Note 7
AN7 RRDE bipot - Electrochemistry
Sensitivity Detection limits using proteinsEkkO – Spectroscopy – Application Note 32
AN32. Sensitivity Detection limits using proteins. Spectroscopy
Determination of the diffusion coefficient of an inserted species in a host electrode with EIS, PITT and GITT techniques Battery – Application Note 70
This application note shows the various relationships and methods needed to extract the diffusion coefficient of an inserted species into a host electrodes using Electrochemical Impedance Spectroscopy (EIS), Potentiostatic Intermittent Titermittent Technique (PITT) and Galvanostatic Intermittent Titration technique (GITT). The main results are that when the system is composed of several charge transfer resistances and double layer capacitances, only EIS can simply lead to the diffusion time constants and hence diffusion coefficients.
Electrochemical Noise Measurements Part I: ASTM assessment and validation of instrumental noise Corrosion – Application Note 39-1
AN 39-1. Electrochemical noise measurement ENA ASTM #1 .Electrochemistry
Battery cycling with reference electrodes using the PAT-cell test cell Battery – Application Note 58
AN58. Reference electrode. Electrochemistry
Linear vs. non-linear systems in impedance measurements (EIS linearity) Battery – Application Note 9
AN 9. EIS linearity – Electrochemistry & Battery. Electrochemistry
CV Sim: Simulation of the simple redox reaction (E) – Part I: The effect of scan rate Kinetics – Application Note 41-1
AN 41-1. CV simulation #1 . Electrochemistry
THD: parameters affecting its value & comparison with other methods of linearity assessment Battery & Corrosion – Application Note 65
AN65. EIS Quality Indicators THD Electrochemistry
pH stability and disassembly mechanism of wild-type simian virus 40
CITATION: Roi Asor, Daniel Khaykelson, Orly Ben-nun-Shaul, Yael Levi-Kalisman, Ariella Oppenheimc and Uri Raviv
Ohmic Drop Part II: Intro. to Ohmic Drop measurement techniques (Ohmic drop measurement) Battery – Application Note 28
AN28, Ohmic drop measurement techniques, Electrochemistry
Ohmic Drop Part III: Suitable use of the ZIR techniques (Ohmic drop & ZIR techniques) Battery – Application Note 29
AN29< Ohmic drop & ZIR techniques, Electrochemistry
Distribution of Relaxation Times (DRT): an introduction Battery – Application Note 60
AN60. EIS-Distribution of Relaxation Times DRT. Electrochemistry
Intermittent Contact (ic) SECM for relief of major topographic features Scanning Probes – Application Note 16
Scanning Probe Electrochemistry. AN 16. Application Note 16
Constant power technique and Ragone plot Battery & Electrochemistry – Application Note 6
AN6. Ragone plot. Electrochemistry
Precision and Accuracy in Coulombic Efficiency Measurements (High Precision Coulometry HPC) Battery – Application Note 53
AN54. High Precision Coulometry HPC. Battery Cycling/Electrochemistry
Corrosion current determination with mass transfer limitation Corrosion – Application Note 47
AN4. Mass transfer limitation. Electrochemistry
EIS Quality Indicators: THD, NSD & NSR Battery & Corrosion – Application Note 64
AN64. EIS Quality Indicators: THD, NSD & NSR. Electrochemistry
Introduction to Foil Cell Scanning Probes – Application Note 20
AN20. Introduction to Foil Cell. Scanning Probe Electrochemistry
Measurement of electrochromic bandshift at 520 nm with real-time scatter correction at 546 nmLife Sciences – Application Note 4
AN#4 JTS, Photosynthesis Measurement of electrochromic bandshift at 520 nm with real-time scatter correction at 546 nm
Potentio or Galvano EIS Battery – Application Note 49
AN49. Potentio or Galvano EIS Electrochemistry
Electrical characterization of a ceramic with MTZ-35 and HTSH-1100 test fixture Material Science – Application Note 1
AN1. Electrical characterization of a ceramic with MTZ-35 and HTSH-1100 test fixture. Materials Science
Introduction to the USB-PIO: measuring the effect of light on a live leaf Scanning Probes – Application Note 15
AN 15. Application Note 15. Scanning Probe Electrochemistry
UV-Visible spectroscopy & electrochemistry coupling: Spectroelectrochemisty on polypyrrol film Electrochemisty – Application Note 12
AN12. Spectroelectrochemistry. Electrochemistry
Electrochemical Noise Measurements: Part II: ASTM assessment on a real electrochemical system Corrosion – Application Note 39-2
AN 39-2. Electrochemical noise measurement ENA ASTM #2. Electrochemistry
ZFit and equivalent electrical circuits (EIS Equivalent Circuit) Battery – Application Note 14
AN14. EIS Equivalent Circuit – Electrochemistry & Battery Application. Electrochemistry
Two questions about Kramers-Kronig transformations (EIS Kramers-Kronig) Battery – Application Note 15
EIS Kramers Kronig - Battery & Electrochemistry
Staircase Potentio Electrochemical Impedance Spectroscopy (SPEIS) and automatic successive ZFit analysis Battery – Application Note 18
AN 18. EIS Zfit - Electrochemistry, Battery & corrosion. Electrochemistry
EIS measurements on Li-ion batteries EC-Lab® software parameters adjustment (EIS optimizations) Battery – Application Note 23
AN 23, EIS optimizations, Electrochemistry
Electrochemical Noise Measurements Part III: Determination of the noise resistance Rn Corrosion – Application Note 39-3
AN 39-3. Electrochemical noise measurement ENA ASTM #3. Electrochemistry
EIS measurements on a RDE Part I: Determination of a diffusion coefficient using the new element Winf Electrochemistry – Application Note 66
AN 66. RDE diffusion. Electrochemistry
