Surface characterisation.

Uses ()

Analysis Instruments and set-up Methodology and best practices Techniques

All results in

Topics (21)

M470: An all in one scanning probe electrochemistry software

Everything you need for local electrochemistry in one software

Which SCAN-Lab software should I use?

Information on when to use the different BioLogic software available for scanning probe electrochemistry.

How to automate experiments and build complex protocols: An introduction to the M470 sequencer

Automating experiments, and writing complex protocols with the M470 sequencer.

How do I choose between step mode and sweep mode?

Choosing step mode or sweep mode affects experiment quality and duration from Scanning Electrochemical Microscopy to Atomic Force Microscopy

SECM101: What is Constant Distance (CD)-SECM?

Constant Distance (CD)-SECM is introduced in this BioLogic Learning Center article

Scanning Probe Electrochemistry: A glossary of terms

What do the different terms relating to local electrochemistry mean? This article gives a definitive list

Key factors to consider when looking for a scanning electrochemical workstation.

Factors of interest when looking at a scanning electrochemical workstation are discussed.

SECM101: Introduction to the redox mediator

The Scanning Electrochemical Microscopy (SECM) redox mediator is introduced.

SKP vs KPFM

Scanning Kelvin Probe and Kelvin Probe Force Microscopy are compared.

OSP101: Introduction to the Optical Surface Profiler technique

An introduction to the Optical Surface Profiler (OSP) technique

Which scanning probe electrochemistry technique?

The scanning probe electrochemistry techniques on the M470 are compared.

Multichannel & Single-channel potentiostats – what’s the difference? (Electrochemistry Basics Series)

An overview of the differences between single channel and multichannel potentiostat galvanostats

Scanning probe electrochemistry for biological research

A short article with accompanying multimedia presentation outlining the benefits of Scanning probe electrochemistry for biological studies

The RRDE as a pH probe in situ

The Rotating Ring Disk Electrode (RRDE) Ring can be used as a potentiometric or amperometric in situ pH probe. This is extremely useful to study electrochemical reactions that involves OH- or H+ ions.

dc-SECM and the SECM150

The dc-SECM technique. Includes a link to a more detailed, downloadable document.

QCM: Why measure at overtones matters

The benefits of QCM measurements at overtones are described.

QCM: History and principles

The principles behind the QCM technique are described as well as an introduction to its history.

QCM: When is the Sauerbrey equation valid?

How to ensure the validity of the Sauerbrey equation

QCM: Measurement principles

The measurement principles used in BluQCM are described

Scanning probe electrochemistry & biology research

The role of scanning probe electrochemistry in biological systems

Imaging the electrochemistry of photosynthesis

How is scanning probe electrochemistry applied to the investigation of photosynthesis?