EC-Lab Technical Notes 33 DC-DC boards for SP-300 technology
Looking for something?
Results in
Results in
Results in
Results in
Products.
Accessories.
Document.
EC-Lab Technical Notes 33: DC-DC boards for SP-300 technology instruments
EC-Lab Technical Notes 24: Potentiostat board installation on SP-300 chassis (BiPotentiostat option)
EC-Lab Technical Notes 24 Potentiostat board installation on SP-300
SCAN-Lab Technical Notes 13: Connecting to the SP-300 by Ethernet connection (instead of USB)
Connecting to the SP-300 by Ethernet connection (instead of USB)
EC-Lab Technical Notes 03 Communicate with the instruments
EC-Lab Technical Notes 03 TCP/IP installation and configuration
EC-Lab Technical Notes 19: Network parameters configuration with EC-Lab® and EC-Lab® Express software
Technical Notes 19 Network parameters configuration EC Lab
EC-Lab Technical Notes 25b: Control of the potential/current signal by an external device Part II : control by a channel of the potentiostat
EC-Lab Technical Notes 25b Control of the potential/current signal by an external device Part II : control by a channel of the potentiostat
Electrochemical Noise Measurements Part III: Determination of the noise resistance Rn Corrosion – Application Note 39-3
AN 39-3. Electrochemical noise measurement ENA ASTM #3. Electrochemistry
Equivalent model of electrochemical cell inc. ref. electrode impedance and potentiostat parasitics Battery – Application Note 44
AN44. EIS artifacts precautions. Electrochemistry
Battery cycling with reference electrodes using the PAT-cell test cell Battery – Application Note 58
AN58. Reference electrode. Electrochemistry
Your new potentiostat: unboxing, setup and settings for your first measurement
Support videos to guide you through the setup process for your new BioLogic potentiostat
Electrochemical Noise Measurements Part I: ASTM assessment and validation of instrumental noise Corrosion – Application Note 39-1
AN 39-1. Electrochemical noise measurement ENA ASTM #1 .Electrochemistry
The mystery of potentiostat stability explained (Potentiostat stability) Battery – Application Note 4
AN 4. Potentiostat stability - Electrochemistry & Battery. Electrochemistry
Application of the bipotentiostat to an experiment with a Rotating Ring-Disk Electrode (RRDE bipot) Battery – Application Note 7
AN7 RRDE bipot - Electrochemistry
Multi Pitting Corrosion (Pitting) Corrosion – Application Note 25
AN 25, Pitting - Corrosion, Electrochemistry
Application of the Capacitance – Voltage curve to photovoltaic cell characterizations (EIS & CV curve) Photovoltaic – Application Note 35
AN35. EIS & CV curve. Electrochemistry.
High current (DC and EIS) measurements on electrolyzers Electrolyzers – Application Note 63
AN 63.High current (DC and EIS) measurements on electrolyzers. Electrochemistry
EC-Lab Technical Notes 10: “p” low current option: installation and calibration
EC-Lab Technical Notes 10 low current option:
EC-Lab Technical Notes 40: Influence of the current range on the response time of a potentiostat
EC-Lab Technical Notes 40 Influence of the current range on potentiostat response time
Photovoltaic Characterizations: Polarization and Mott Schottky plot Photovoltaic – Application Note 24
AN24 EIS IV characterizations Mott Schottky, Electrochemistry
IMVS investigation on photovoltaic cell (IMVS) Photovoltaics – Application Note 30
AN30 IMVS - Electrochemistry & Photovoltaic, Electrochemistry
VASP: an innovative technique for corrosion monitoring (VASP Rp determination) Corrosion – Application Note 36
AN36. VASP Rp determination. Electrochemistry
CASP: a new method for the determination of corrosion parameters (CASP Rp determination) Corrosion – Application Note 37
AN37. CASP Rp determination. Electrochemistry
Physicochemical exfoliation of graphene sheets using graphitic carbon nitride
CITATION: V. Priyanka, G. Savithiri, R. Subadevi, V. Suryanarayanan and M. Sivakumar
Scalability and stacking of self-stratifying microbial fuel cells treating urine
CITATION: (Biologic SP-50) XA Walter, C Santoro, J Greenman, IA Ieropoulos - Bioelectrochemistry, 2020 - Elsevier
Sweep scan with Height TrackingScanning Probes – Application Note 26
The characterization of Vanadium Redox Battery Cells using BioLogic BCS-815 battery cyclers & a Pinflow® 20 cm² test cell.
Copper Thiophosphate (Cu3PS4) as an Electrode Material for Lithium Solid-State Batteries with Lithium Thiophosphate (β–Li3PS4) Electrolyte
CITATION: Zhenggang Zhang, Katherine A. Mazzio, Luise M. Riegger, Wolfgang Brehm, Jürgen Janek, Joachim Sann, Philipp Adelhelm
Quantifying the electrochemical active site density of precious metal-free catalysts in situ in fuel cells
CITATION: Rifael Z. Snitkoff-Sol, Ariel Friedman, Hilah C. Honig, Yan Yurko, Alisa Kozhushner, Michael J. Zachman, Piotr Zelenay, Alan M. Bond & Lior Elbaz
Mitigating phosphoric acid migration in high temperature polymer electrolyte membrane fuel cells with hydrophobic polysilsesquioxane-based binders
CITATION: Dong-Yeop Yoo, Jiyoon Jung, Young Sang Park, Gwan Hyun Choi, Ho Gyu Yoon, Seung Sang Hwang and Albert S. Lee
Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells
CITATION: Sihyuk Choi, Chris J. Kucharczyk, Yangang Liang, Xiaohang Zhang, Ichiro Takeuchi, Ho-Il Ji & Sossina M. Haile
Proton-Conducting Graphene Membrane Electrode Assembly for High Performance Hydrogen Fuel Cells
CITATION: Ravikumar Thimmappa, Manu Gautam, Mruthyunjayachari Chattanahalli Devendrachari, Alagar Raja Kottaichamy, Zahid Manzoor Bhat, Ahmed Umar, and Musthafa Ottakam Thotiyl*
Learning center.
Multichannel & Single-channel potentiostats – what’s the difference? (Electrochemistry Basics Series)
An overview of the differences between single channel and multichannel potentiostat galvanostats
Ensuring the quality of Electrochemical Impedance Spectroscopy measurements on high-power systems
The quality of EIS measurements on high-power systems is presented in this article.
Potentiostats: Obtaining high quality measurements (Electrochemistry Basics Series)
This article gives some tips to improve the quality of measurements, from optimizing the setup or the connection interfaces, to the geometry of the cell itself.
How to check and correct the time variance of your system under EIS measurements
Are you running EIS experiments on a corroding electrode or on a charging or discharging battery and obtaining unusual or strange data at low frequencies? You should check that the change of your system does not affect your EIS measurements. Here are a few tools available in EC-Lab® to help you deal with such situations.
Obtain corrosion rate versus time automatically with the Corrosimetry technique!
The article explains the corrosimetry technique, and how corrosion rates over time can be obtained automatically.
What is a potentiostat and its use in Science & Industry (Electrochemistry Basics Series)
What is a potentiostat? An article detailing every aspect of this versatile electrochemical multitool. Covers Potentiostat functionality and operation, the history of the potentiostat, uses and applications and the future of the potentiostat
Key factors to consider when looking for a scanning electrochemical workstation.
Factors of interest when looking at a scanning electrochemical workstation are discussed.
The Faraday Cage: What is it and how does it work?
What is a Faraday Cage. How does it work? The article looks at the use of the Faraday cage in electrochemistry.