Catalogs 5 min read

Electrochemistry Accessory catalog

Latest updated: October 12, 2021

Related files

Electrochemistry accessories catalog

Related products

ITS temperature climatic chamber

The ITS is a temperature climatic chamber with a small laboratory footprint, enabling temperature control from - 35 °C through to + 150 °C. The device has been designed to accommodate BioLogic leak-tight sample holders (CESH).

BluRev RDE/RRDE

BluRev is a range of robust, versatile, rotating disk (RDE) and rotating ring-disk (RRDE) electrodes ideal for use with BioLogic potentiostats. A range of quick-fit exchangeable electrode tips (multiple materials/diameters) can be easily added.

BCS-CAL

BCS-CAL is an automated calibration kit for the BCS-800 battery cycler series.

BluQCM QSD

The BluQCM QSD is a single channel, compact and modular instrument. Its low footprint and lightweight makes it particularly suitable for crowded labs. It is available as standalone, with temperature control or/and flow control.

FlexP0012

Booster designed specifically for electrolyzer/fuel cell characterizations with a continuous maximum current of -200/+195 A for a single unit extendable up to -800/780 A by connecting four units in parallel

Low Current option

Lowers the base current range from 10 μA to 1 nA

SAM-50

link up to 3 SAM-50 to record up-to 30 additional voltages.

ARG

Additional module providing voltage scans of up to 1 MV/s with an acquisition time down to 1 μs.

Boosters for Premium Potentiostats

Boosters for Essential Potentiostats

King size reference electrodes

In addition to small reference electrodes, larger and sturdier reference electrodes are also available. Various electrodes are available depending on the experiment conditions. Please also note a reference electrode dedicated to EIS measurements, where a capacitance in parallel is added to remove all the high frequencies artefacts of the reference electrodes.

Large volume analytical cells

This cell is perfect for standard analytical electrochemistry experiments with electrolyte volumes of several tens of mL. It is also compatible with the BluRev product range, ie the electrode rotators.

Small volume analytical cells

Small volume cells for precious electrolytes and small active areas, to be used mostly for analytical electrochemistry

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

Standard corrosion cells

The standard corrosion cell is a one-liter cell that can accommodate oversized samples and is specially designed for uniform corrosion experiments.

Avesta cell

The Avesta cell takes its name from Avesta Steel and is designed to prevent crevice corrosion between the gasket and the sample from occurring

Flat cells

The flat cell is a double-jacketed 250 mL cell designed to perform standard corrosion experiments on large flat samples of any size with a maximum thickness of 1 cm. The exposed area can be 1 or 10 cm².

Galvanic cells

This cell allows to have two large metallic samples as working electrodes and to perform experiments such as Evans diagram or galvanic corrosion current determination.

Coating cell

This simple cell is designed to perform electrochemical experiments on large coated samples, with no restriction of sizes.

Plate material evaluating cell

A simple easy-to-use cell to study large plate samples up to 1 cm².

Small volume cells vials

Replacement vials are available for VC-4, SVC-2, SVC-3 small analytical cells as well as RRDE-3A cell. PTFE caps and cell holders can also be found in this section.

Large Volume Cell Vials

Replacement glassware or larger vials are available for the large analytical cell and the standard corrosion cell.

Purge and bridge tubes for corrosion cells

The bridge tubes allow to prevent the reference electrode from being contaminated by the electrolyte. Purge tubes are used to control the gas concentration in and above your electrolyte.

Purge and bridge tubes for analytical cells

The bridge tubes allow to prevent the reference electrode from being contaminated by the electrolyte. Purge tubes are used to control the gas concentration in and above your electrolyte.

Bridge tubes for king size reference electrodes

The bridge tubes allow to prevent the reference electrode from being contaminated by the electrolyte.

Small size bridge tubes

These bridge tubes for small reference electrodes can also be used as replacement glassware.

Working electrodes

Working electrodes are of utter importance because this is where everything that interests the electrochemist will happen. A large offer of working electrodes are available with a very wide range of size and materials.

Counter electrodes

Small reference electrodes

Reference electrodes need to have an intrinsic redox potential that is stable. A large variety of small reference electrodes is available to cover all different electrolytes and applications.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

Dummy cells and test boxes

Test boxes have the great advantage of being composed of electrical circuits. They can have various functions: calibration, troubleshooting and teaching.

Protective suitcase

High-quality protective case designed to fit the following potentiostat/galvanostats: SP-200, SP-240, SP-300

Longer cables and hermetic cables for glove box

In this section, non-standard cables with various increased lengths are presented for use in specific applications. Furthermore, glove-box feedthroughs for measurements performed in a glove box are also shown.

Multi-electrode investigation cables

For the VMP3 products family, we offer several options to facilitate the connection cables when multi-electrode experiments are performed as, for example, RRDE experiments or corrosion experiments on several samples using the same reference and the same counter electrode.

Faraday cages

The presence of other electrical equipment in the lab can affect your measurement, especially when measuring high impedance systems or very low currents. In this situation, electromagnetic noise emitted by external equipment can be picked up. To prevent this from happening a Faraday cage is needed.

External device connection

Sometimes the electrochemical experiment is not enough to completely describe your system, and additional information is needed. In such case, a coupling with the electrochemical experiment is necessary. These few accessories will facilitate this coupling.

Connectors

Here you will find all the connectors you need at the end of the leads to actually connect to the cell. Please note that The simpler and the shorter the connection, the better. Adaptors are also available from 2 to 4 mm and vice versa.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

Electrode tips

A wide range of materials and sizes are available for electrode tips to be mounted on the BluRev products.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

SEC2020 system

The SEC2020 spectrometer kit is a compact system, ideal for spectroelectrochemical experiments. All the components sit on a sturdy aluminium platform. It includes high-performance grating and optical design, which makes it able to measure on a wide wavelength range with a high sensitivity.

Flow spectroelectrochemical cell

This flow spectrelectrochemical cell allows to perform flow injection or stopped flow analysis with thin layer cells ranginf from 0.1 to 0.5 mm.

Thin layer spectroelectrochemical cell

Modular system that can be work with common demountable or semi-demountable IR cell

Static experiment

Spectroelectrochemical cell kits including components, grid metal, pt counter electrode, purging tube etc...

CCH

This simple coin cell holder allows to test simultaneously 4 coin cells. It is compatible with MPG2 and VMP3 multichannel potentiostat/galvanostat. 4 of these are needed reach 16 simultaneous experiments.

CCH-120/CCH-124

These easy-to-use single coin cell holders are available for two coin cell diameters : 20 and 24 mm. The maximum thickness of the coin cells that can be held is 3.2 mm.

CCH-8

The CCH-8 is an 8 position coin holder designed for 20 and 24 mm coin cells, with a maximum thickness of 3.2 mm. Its 4 point connection provides low connection impedance, necessary for accurate AC and DC tests.

CC4-200A

The CC4-200A was specially designed for high power applications up to 200 A. Four FlexP0160 in parallel can reach 200 A and four HCV-3048 in parallel can reach 120 A.

CC4-60A

The CC4-60A is pretty much one half of the CC8. It was specially designed for BCS-815 and is used when 60 A are needed with 4 BCS-815 channels connected in parallel. It can also be used with VMP-300 and VSP-300 boosters.

CC8

The CC8 current collector offers the possibility to connect in parallel up to eight channels and increase the maximum current that can be passed through the cell.

CBH-4 / CBH-8

CBH-4 and CBH-8 are 4 and 8-position battery holders, respectively, dedicated to large and high power cylindrical battery cells.

BH-1i

The BH-1i Battery Holder is a modular accessory for battery test applications, compatible with a wide variety of battery types (coin cells, 18650 and 26650 cells), up to 4 batteries can be tested simultaneously, with a maximum current of 15 A per channel.

PBH-4 / PBH-8

4 and 8-channel holders are available for small pouch cells up to 32 A. These holders have 4-point connection allowing high accuracy measurements.

PPBH-132 / PPBH-1100

This 4-point measurement single channel holder is available in two versions, depending on the demanded maximum current: 32 or 100 A. Thanks to an adaptable tablet the same holder can be used for prismatic and flat pouch cells.

Redox Flow Battery Cells

Our range of redox Flow Battery cells are manufactured by Pinflow. They provide optimal reproducibility as well as a high modularity.

SKP Probes

Accessory designed for use in SKP (scanning kelvin probe) technique

SVET Probes

A single platinized Pt tip designed specifically to measure iR drop in the electrolyte above the sample surface

SECM UME Probes

Choice of fused silica and pulled capillary SECM probes covering a range of sizes form 1 to 25 µm diameter

LEIS Probes

Scanning probes for use with the M370 and M470

µTriCell™

Electrochemical cell to be used with Scanning Electrochemical Microscopy on the M470

Shallow µTriCell™

Low volume electrochemical cell for Scanning Electrochemical Microscopy on the M470 platform

Foil Cell

Designed for use with flat samples, including those used for battery electrodes

Environmental TriCell™

Electrochemical cell to be used with SKP, LEIS, SVET and SDC

HTCC

Small volume conductivity cell with a nominal constant of 1.0 cm -1. Operating between- 50 °C to 180 °C

HTSH-1100

A sample holder specifically designed for the electrical characterization of solid materials over the temperature range between room temperature and 1100 °C. The HTSH-1100 is also suitable for heat treatment in controlled atmospheres.

CESH

The Controlled Environment Sample Holder (CESH) is a parallel plate sample holder dedicated to electrical characterization of flat material samples in the temperature range between -40 °C and 150 °C.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

PBH-125 / PBH-150

Two versions are available for pouch cell testing, one with a maximum current of 25 A, and another with a maximum current of 50 A. The 4-point connection of these holders allows high-accuracy measurements.

BluRev Enclosure

The BluRev Enclosure is a multi-purpose lab accessory specifically designed for BioLogic instruments. The BluRev electrode, the cell and the cell cables are firmly held to maximise the stability, the reproducibility and the safety of all your steady-state experiments with a rotating electrode. Keep it steadier !

Sensors and cells

Unique design for quick/easy resonator positioning. Optimized contact helps generate stable, reliable measurements.

BluQCM QSD

The BluQCM QSD is a single channel, compact and modular instrument. Its low footprint and lightweight makes it particularly suitable for crowded labs. It is available as standalone, with temperature control or/and flow control.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

VCAM3

Accessory designed to allow users to view the distance between probe tip & sample surface

USB-PIO

Especially useful for investigations of the effect of light on a living plant or on dye sensitized solar cells

Glove Box Cables

Accessory designed to enable the SCV 470 control unit to be used outside a glove box with the scanning head and associated devices inside

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

BluRev Rotating Disk and Ring-Disk Electrode (RDE/RRDE)

BluRev is a range of robust, versatile, rotating disk (RDE) and rotating ring-disk (RRDE) electrodes ideal for use with BioLogic potentiostats. A range of quick-fit exchangeable electrode tips (multiple materials/diameters) can be easily added.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

An extensive line of product accessories ranging from sophisticated quartz crystal microbalances to electrodes.

Standard corrosion cells

The standard corrosion cell is a one-liter cell that can accommodate oversized samples and is specially designed for uniform corrosion experiments.

Electrode tips

A wide range of materials and sizes are available for electrode tips to be mounted on the BluRev products.