Safe, simple, powerful
The CC8 current collector offers the possibility to connect in parallel up to eight channels and increase the maximum current that can be passed through the cell.
VMP-300 and VSP-300 boosters, as well as BCS-815 channels can be connected in parallel to increase the maximum available current that can be applied to one cell. To facilitate the connection and make the whole setup safer, the current collector is required. It features eight input channels and each channel has 4 mm receptacles for the power cables and 2 mm receptacles for the voltage sense cables. As output you can find two 8 mm receptacles for the power and 2 mm receptacles for the voltage sense cables. Connection cables from the CC8 to the cell are included. Two configurations are offered: one with tablets and cables from the BCS to the CC8 and the other without tablets and cables from BCS to CC8. The maximum current that can be passed is 120 A.
Specifications and ordering information
The CC8 is provided by default with connection cables to the cell.
|Max current||120 A|
|T° range||-10 °C to +70 °C|
|Input power||4 mm|
|Input voltage||2 mm|
|Output power||6 mm|
|Output voltage||2 mm|
|Output power||2 x 2 m power cables with 6 mm receptacles|
|Output voltage||2 x 2 m sense cables with 2 mm banana plugs|
|Included connection kit|
|Power||1 pair of 6 mm receptacles|
|Voltage sense||2 pairs of lugs with 4 mm receptacles|
|CC8 Current Collector (8 channels) for BCS-815 with BCS cables and tablets||096-015|
|CC8 Current Collector (8 channels) for VSP-300/VMP-300/BCS-815 without BCS cables and tablets||096-015/1|
|Included connection kit for FlexP-0060/0160, HCV-3048, CC4-60A and CC8||094-110/CNT|