CESH-e (Enhanced Controlled Environment Sample Holder)
The Enhanced Controlled Environment Sample Holder (CESH-e) is a parallel plate sample holder dedicated to the electrical characterization of flat material samples in the temperature range between -40 to 150 °C.
Hydrogen reference electrodes
HydroFlex® and MiniHydroFlex® are robust, easy-to-use Reversible Hydrogen Electrodes (RHE) suitable for any application.
A robust, unbreakable cell that is perfect for the most demanding experiments in corrosion or those involving gas.
A robust, unbreakable cell, perfect for the most demanding experiments involving corrosion or gas.
A premium range battery holder using a 4-point connection. The CCH-1 is a premium alternative to the CCH-120 and CCH-124 coin cell battery holders.
PBH-125 / PBH-150
Two versions are available for pouch cell testing, one with a maximum current of 25 A, and another with a maximum current of 50 A. The 4-point connection of these holders allows high-accuracy measurements.
Working electrodes are of utter importance because this is where everything that interests the electrochemist will happen. A large offer of working electrodes are available with a very wide range of size and materials.
Small reference electrodes
Reference electrodes need to have an intrinsic redox potential that is stable. A large variety of small reference electrodes is available to cover all different electrolytes and applications.
Standard corrosion cells
The standard corrosion cell is a one-liter cell that can accommodate oversized samples and is specially designed for uniform corrosion experiments.
The Avesta cell takes its name from Avesta Steel and is designed to prevent crevice corrosion between the gasket and the sample from occurring
The flat cell is a double-jacketed 250 mL cell designed to perform standard corrosion experiments on large flat samples of any size with a maximum thickness of 1 cm. The exposed area can be 1 or 10 cm².
This cell allows to have two large metallic samples as working electrodes and to perform experiments such as Evans diagram or galvanic corrosion current determination.
Large volume analytical cells
This cell is perfect for standard analytical electrochemistry experiments with electrolyte volumes of several tens of mL. It is also compatible with the BluRev product range, ie the electrode rotators.
This simple cell is designed to perform electrochemical experiments on large coated samples, with no restriction of sizes.
This simple coin cell holder allows to test simultaneously 4 coin cells. It is compatible with MPG2 and VMP3 multichannel potentiostat/galvanostat. 4 of these are needed reach 16 simultaneous experiments.
The CC4-200A was specially designed for high power applications up to 200 A. Four FlexP0160 in parallel can reach 200 A and four HCV-3048 in parallel can reach 120 A.
The CC4-60A is pretty much one half of the CC8. It was specially designed for BCS-815 and is used when 60 A are needed with 4 BCS-815 channels connected in parallel. It can also be used with VMP-300 and VSP-300 boosters.
PBH-4 / PBH-8
4 and 8-channel holders are available for small pouch cells up to 32 A. These holders have 4-point connection allowing high accuracy measurements.
CBH-4 / CBH-8
CBH-4 and CBH-8 are 4 and 8-position battery holders, respectively, dedicated to large and high power cylindrical battery cells.
A sample holder specifically designed for the electrical characterization of solid materials over the temperature range between room temperature and 1100 °C. The HTSH-1100 is also suitable for heat treatment in controlled atmospheres.
The BH-1i Battery Holder is a modular accessory for battery test applications, compatible with a wide variety of battery types (coin cells, 18650 and 26650 cells), up to 4 batteries can be tested simultaneously, with a maximum current of 12 A per channel.
The CCH-8 is an 8 position coin holder designed for 20 and 24 mm coin cells, with a maximum thickness of 3.2 mm. Its 4 point connection provides low connection impedance, necessary for accurate AC and DC tests.
PPBH-132 / PPBH-1100
This 4-point measurement single channel holder is available in two versions, depending on the demanded maximum current: 32 or 100 A. Thanks to an adaptable tablet the same holder can be used for prismatic and flat pouch cells.
Small volume conductivity cell with a nominal constant of 1.0 cm -1. Operating between- 50 °C to 180 °C
Especially useful for investigations of the effect of light on a living plant or on dye sensitized solar cells
Dummy cells and test boxes
Test boxes have the great advantage of being composed of electrical circuits. They can have various functions: calibration, troubleshooting and teaching.
A single platinized Pt tip designed specifically to measure iR drop in the electrolyte above the sample surface
High-quality protective case designed to fit the following potentiostat/galvanostats: SP-200, SP-240, SP-300
Longer cables and hermetic cables for glove box
In this section, non-standard cables with various increased lengths are presented for use in specific applications. Furthermore, glove-box feedthroughs for measurements performed in a glove box are also shown.
Small volume analytical cells
Small volume cells for precious electrolytes and small active areas, to be used mostly for analytical electrochemistry
Low volume electrochemical cell for Scanning Electrochemical Microscopy on the M470 platform
SECM UME Probes
Choice of fused silica and pulled capillary SECM probes covering a range of sizes form 1 to 25 µm diameter
Redox Flow Battery Cells
Our range of redox Flow Battery cells are manufactured by Pinflow. They provide optimal reproducibility as well as a high modularity.
Multi-electrode investigation cables
For the VMP3 products family, we offer several options to facilitate the connection cables when multi-electrode experiments are performed as, for example, RRDE experiments or corrosion experiments on several samples using the same reference and the same counter electrode.
Glove Box Cables
Accessory designed to enable the SCV 470 control unit to be used outside a glove box with the scanning head and associated devices inside
The presence of other electrical equipment in the lab can affect your measurement, especially when measuring high impedance systems or very low currents. In this situation, electromagnetic noise emitted by external equipment can be picked up. To prevent this from happening a Faraday cage is needed.
External device connection
Sometimes the electrochemical experiment is not enough to completely describe your system, and additional information is needed. In such case, a coupling with the electrochemical experiment is necessary. These few accessories will facilitate this coupling.
The CC8 current collector offers the possibility to connect in parallel up to eight channels and increase the maximum current that can be passed through the cell.