5 min read
EC-Lab Technical Notes 43: Battery Holders : Guide to make a wise choice and a proper use.Latest updated: February 16, 2021
This Technical Note provides guidelines to help you find the most suitable battery holder for your applications and to explain how to use them properly.
CBH-4 / CBH-8
CBH-4 and CBH-8 are 4 and 8-position battery holders, respectively, dedicated to large and high power cylindrical battery cells.
PBH-4 / PBH-8
4 and 8-channel holders are available for small pouch cells up to 32 A. These holders have 4-point connection allowing high accuracy measurements.
PPBH-132 / PPBH-1100
This 4-point measurement single channel holder is available in two versions, depending on the demanded maximum current: 32 or 100 A. Thanks to an adaptable tablet the same holder can be used for prismatic and flat pouch cells.
This simple coin cell holder allows to test simultaneously 4 coin cells. It is compatible with MPG2 and VMP3 multichannel potentiostat/galvanostat. 4 of these are needed reach 16 simultaneous experiments.
The CCH-8 is an 8 position coin holder designed for 20 and 24 mm coin cells, with a maximum thickness of 3.2 mm. Its 4 point connection provides low connection impedance, necessary for accurate AC and DC tests.