5 min read

EC-Lab Technical Notes 01: VMP, VMP2, MPG or BiStat IP address change

Latest updated: August 16, 2021

Introduction

This Technical Note will explain how to change the IP address on VMP, MPG, VMP2 and Bistat instruments. To connect the VMP (or MPG) to your local network, you will need to enter a valid IP address for the VMP (or MPG) for the local network. The instructions in this Technical Note explain how to enter or modify the VMP’s (or MPG) IP address.

Related files

EC LAB TN1 VMP VMP2 MPG BiStat IP address change

You cannot access this resource because you are not logged in. Log in

Related products

MPG-200 battery cycler series

The MPG-200 series is a high-end battery testing system made up of two core configurations. The MPG-2 features 16 independent channels at 100 mA, whereas the MPG-205 offers eight 5 A channels. Both MPG battery testing systems are available with or without EIS capabilities.

HCP-1005 Potentiostat

A compact high-current electrochemical workstation - FRA specifically designed to study high-capacity secondary batteries

HCP-803 Potentiostat

A research-grade electrochemical workstation with the power of an 80 A booster

VSP Potentiostat

EIS measurement from 10 µHz to 1 MHz, Current ranging from 10 μA up to 1 A

VSP-3e Potentiostat

Eight channel potentiostat / galvanostat with +/- 1A (expandable up to 800A); Ethernet connectivity, Built-in EIS (Electrochemical Impedance Spectroscopy)

VMP-3e Multichannel Potentiostat

16 channel electrochemical workstation with 1 A (extendable to 800 A) current capability as well as EIS Quality Indicators. This enhanced multichannel potentiostat is perfect for battery research & testing

BP-300 potentiostat

A versatile potentiostat capable of generating any bipot measurement, such as Rotating Ring Disk Electrode (RRDE) and InterDigitated Array (IDA) electrodes.

SP-200 Potentiostat

The perfect electrochemical workstation for corrosion with the 100 fA accuracy ultra-low current option

SP-240 Potentiostat

A powerful, research grade, potentiostat offering a current range of up to 4 Amps.

SP-150 Potentiostat

Based on a modular chassis, this potentiostat can be customized to address every possible application in the field of classical electrochemistry.

SP-50e Potentiostat

A robust, single channel, general purpose potentiostat perfect for both general electrochemistry research needs as well as teaching.

SP-150e Potentiostat

The SP–150e is the only ampere capable electrochemical workstation to boast high-current capability (800 A with boosters), three EIS quality indicators (THD, NSD, NSR) for Electrochemical Impedance Spectroscopy validation and Ethernet compatibility for improved group-working.

VMP3 Multichannel Potentiostat

Includes low current measurement, impedance and high current capability via plug-in modules.

SP-50 Potentiostat

User-friendly electrochemical workstation designed to address general electrochemistry & corrosion applications amongst others

SP-300 Potentiostat

A state-of-the-art research grade potentiostat with a 500 mA to 10 A range , built-in EIS and many other high-end specifications

BCS-800 battery cycler series

BCS-800 series is a modular battery cycling system designed to meet the needs of every level of the battery value chain, from R&D to pilot production, from production testing to quality control. Made up of three core products (BCS-805, 810 and 815), these advanced battery cyclers offer 8 independent channels with a maximum current of ±150 mA, ±1.5 A and ±15A, respectively per channel.

BCS-CAL for BCS-800

BCS-CAL is an automated calibration kit for the BCS-800 battery cycler series.