5 min read

EC-Lab Technical Notes 42: Bistat3200: A guide to the use of the sync start macro

Latest updated: May 6, 2020

Introduction

The feature ‘SYNC Start’ is available as a macro for Chronoamperometry (RM_Amperometry) and Cyclic Voltammetry (RM_CyclicVoltammetry) techniques with our multichannel systems. This guide assumes you are using BiStat 3200 system and running a Chronoamperometry experiment on Channel 1 and 2. You can apply the macro to any Channel running the same or different experiments (CV or CA) and start all active channels at the same time.

Related files

EC LAB TN42 Bistat3200 A guide to the use of the sync start macro

You cannot access this resource because you are not logged in. Log in

Related products