5 min read

EC-Lab Technical Notes 22: Graphic properties Part I: Graph Style definition

Latest updated: May 6, 2020

Introduction

The aim of this technical note is to define and save a Graph Style for a particular application or user. We have chosen to define a graph style, named “Battery”, especially dedicated to battery applications. In this note, the data file used is 18650_GITT_030604_1.mpr given in the data folder of EC-Lab® software (ECLab\ Data\ Samples).

Related files

EC LAB TN22 Graphic properties Part 1 Graph Style definition

You cannot access this resource because you are not logged in. Log in

Related products

VSP

EIS measurement from 10 µHz to 1 MHz, Current ranging from 10 μA up to 1 A

SP-200

The perfect instrument for corrosion with the 100 fA accuracy ultra-low current option

SP-300

A state-of-the-art research grade potentiostat / galvanostat with a 500 mA to 10 A range , built-in EIS and many other high-end specifications

VMP3

Includes low current measurement, impedance and high current capability via plug-in modules.

VSP-300

Perfect for group working the VSP-300 can be connected to a LAN and controlled independently by multiple users

SP-50

User-friendly potentiostat / galvanostat designed to address general electrochemistry / corrosion applications

VMP-300

EIS capability up to 7 MHz and ultra low current sensitivity with the ULC option

SP-150

Based on a modular chassis, this instrument can be customized to address every possible application in the field of classical electrochemistry.

HCP-803

A research-grade potentiostat with the power of an 80 A booster

SP-240

A powerful, research grade, potentiostat / galvanostat in offering a current range of up to 4 Amps.

HCP-1005

A compact high-current potentiostat / galvanostat / FRA specifically designed to study high-capacity secondary batteries

BP-300

Versatile insturment capable of generating any bipot measurement, such as Rotating Ring Disk Electrode (RRDE) and InterDigitated Array (IDA) electrodes.

VMP-3e

16 channels & 1 A (extendable to 800 A) current capability as well as EIS Quality Indicators. Perfect for battery research/testing

Boosters for VMP3 instruments

VSP-3e

Eight channels, +/- 1A (expandable up to 800A); Ethernet connectivity, Built-in EIS

FlexP0012

booster designed specifically for electrolyzer/fuel cell characterizations with a continuous maximum current of +/-200 A for a single unit extendable up to +/-800 A by connecting four units in parallel

Ultra Low current (down to aA resolution)

Lowers the base current range from 1 μA to 1 pA, making the resolution of the low current option is 80 aA on the 1 pA range.

Low Current option

Lowers the base current range from 10 μA to 1 nA

SAM-50

link up to 3 SAM-50 to record up-to 30 additional voltages.

HCV-3048

A booster pack designed specifically for battery pack characterizations. Continuous maximum current of +/-30 A extendable by +/-120

FlexP0160 & FlexP0060

A powerful booster suitable for Redox Flow Batteries (RFB) or fuel cell stacks.

Current & Voltage Booster for the Premium range

ARG

Additional module providing voltage scans of up to 1 MV/s with an acquisition time down to 1 μs.

MPG-200 Series

The MPG-200 series is a high-end battery tester series made of two core configurations. The MPG-2 features 16 independent channels at 100 mA, whereas the MPG-205 offers eight 5 A channels. Both MPG battery cyclers are available with or without EIS capabilities.

BCS-800 Series

BCS-800 series is a modular battery testing system designed to meet the needs of every level of the battery value chain, from R&D to pilot production, from production testing to quality control. Made up of three core products (BCS-805, 810 and 815), these advanced battery cyclers offer 8 independent channels with a maximum current of ±150 mA, ±1.5 A and ±15A, respectively per channel.