Learning center search

Get the best EIS measurements, even with longer cables

As an industry leader in Electrochemical Impedance Spectroscopy, BioLogic ensures accurate EIS measurements, regardless of cable length, by compensating for parasitic effect with factory-calibrated cables. Focus on your research, not your setup.

ZFit: How to have confidence in results using std err.?

Explaination of the significance of the std err. parameter in ZFit, the EIS fitting tool in EC-Lab.

Ensuring the quality of Electrochemical Impedance Spectroscopy measurements on high-power systems

The quality of EIS measurements on high-power systems is presented in this article.

What is Electrochemical Impedance Spectroscopy (EIS)? Electrochemistry Basics Series

Electrochemical Impedance spectroscopy (EIS) is a powerful tool enabling the study of processes that occur at the interface of the electrode.

CVSim as a learning tool III: Linearity in EIS

How CVSim can be used to study the behaviour of a redox reaction during an Electrochemical Impedance Spectroscopy (EIS) measurements.

LEIS or ac-SECM?

Local Electrochemical Impedance Spectroscopy (LEIS) and Alternating Current-Scanning Electrochemical Microscopy (ac-SECM) are compared.

The easy way to D – the diffusion coefficient

Performing EIS experiments on a Rotating Disk Electrode is a really easy way to access the diffusion coefficient of the electroactive species in the considered electrolyte.

ZSim and ZFit as learning tools. Part I – Acidic corrosion

An overview of ZSim the powerful Electrochemical Impedance Spectroscopy (EIS) simulation tool available in EC-Lab®,

How to use electrochemical impedance spectroscopy (EIS) accuracy contour plots

EIS accuracy contour plots must be used to interpret errors made during EIS measurements and identify the best frequencies possible for a given impedance range.

Investigation of impedance measurements using the Z Sim tool (Electrochemistry Basics Series)

To adjust the frequency range of your EIS experiment or just to see the shape of your model, Z Sim is available on both EC-Lab® and BT-Lab® software.

Split electrochemical impedance spectroscopy (EIS) experiments into multiple sequences: save time without compromising quality

Reliable impedance measurements require the system under study to remain linear and stationary during the whole measurement sequence. This article describes the ideal configuration for studying unstable systems such as batteries or supercaps to save time while maintaining good measurement quality.

Learning Center.

Search by

Get the best EIS measurements, even with longer cables

ZFit: How to have confidence in results using std err.?

Ensuring the quality of Electrochemical Impedance Spectroscopy measurements on high-power systems

What is Electrochemical Impedance Spectroscopy (EIS)? Electrochemistry Basics Series

CVSim as a learning tool III: Linearity in EIS

LEIS or ac-SECM?

The easy way to D – the diffusion coefficient

ZSim and ZFit as learning tools. Part I – Acidic corrosion

How to use electrochemical impedance spectroscopy (EIS) accuracy contour plots

Investigation of impedance measurements using the Z Sim tool (Electrochemistry Basics Series)

Split electrochemical impedance spectroscopy (EIS) experiments into multiple sequences: save time without compromising quality

EIS and Battery Screening

LEIS101: An Introduction to Local Electrochemical Impedance Spectroscopy

Why use Electrochemical Impedance Spectroscopy (EIS) for battery research?

How to check and correct the time variance of your system under EIS measurements

How to make reliable Electrochemical Impedance Spectroscopy measurements with EIS QI™

PEIS or GEIS or GEIS-AA? That is the question.

Electrochemical characterisation of a corrosion system by Impedance spectroscopy

my.biologic.net

Register my instruments

Request a quote

Battery Cycler

Potentiostats / Galvanostats / FRA

Scanning Electrochemistry Workstation

Rapid Kinetics & Spectroscopy