5 min read

EC-Lab Technical Notes 32: How to set the data recording conditions of my measurement?

Latest updated: August 16, 2021

Introduction

Each potentiostat/galvanostat board and the communication board for all BioLogic systems have a buffer memory that is able to temporarily store the data recorded during a measurement. Although the memory size is quite large, memory space is not unlimited. Buffer size and the number of data points that can be stored in these boards are given in Tab.1…

Related files

EC LAB TN32 How to set the data recording conditions of my measurement

You cannot access this resource because you are not logged in. Log in

Related products

MPG-200 battery cycler series

The MPG-200 series is a high-end battery testing system made up of two core configurations. The MPG-2 features 16 independent channels at 100 mA, whereas the MPG-205 offers eight 5 A channels. Both MPG battery testing systems are available with or without EIS capabilities.

VSP Potentiostat

EIS measurement from 10 µHz to 1 MHz, Current ranging from 10 μA up to 1 A

VSP-3e Potentiostat

Eight channel potentiostat / galvanostat with +/- 1A (expandable up to 800A); Ethernet connectivity, Built-in EIS (Electrochemical Impedance Spectroscopy)

VMP-3e Multichannel Potentiostat

16 channel electrochemical workstation with 1 A (extendable to 800 A) current capability as well as EIS Quality Indicators. This enhanced multichannel potentiostat is perfect for battery research & testing

BP-300 potentiostat

A versatile potentiostat capable of generating any bipot measurement, such as Rotating Ring Disk Electrode (RRDE) and InterDigitated Array (IDA) electrodes.

SP-200 Potentiostat

The perfect electrochemical workstation for corrosion with the 100 fA accuracy ultra-low current option

SP-240 Potentiostat

A powerful, research grade, potentiostat offering a current range of up to 4 Amps.

VMP-300 Potentiostat

EIS capability up to 7 MHz and ultra low current sensitivity with the ULC option

VSP-300 Potentiostat

Perfect for group working the VSP-300 electrochemical workstation can be connected to a LAN and controlled independently by multiple users

SP-150 Potentiostat

Based on a modular chassis, this potentiostat can be customized to address every possible application in the field of classical electrochemistry.

SP-50e Potentiostat

A robust, single channel, general purpose potentiostat perfect for both general electrochemistry research needs as well as teaching.

BCS-800 battery cycler series

BCS-800 series is a modular battery cycling system designed to meet the needs of every level of the battery value chain, from R&D to pilot production, from production testing to quality control. Made up of three core products (BCS-805, 810 and 815), these advanced battery cyclers offer 8 independent channels with a maximum current of ±150 mA, ±1.5 A and ±15A, respectively per channel.

VMP3 Multichannel Potentiostat

Includes low current measurement, impedance and high current capability via plug-in modules.

SP-50 Potentiostat

User-friendly electrochemical workstation designed to address general electrochemistry & corrosion applications amongst others

SP-300 Potentiostat

A state-of-the-art research grade potentiostat with a 500 mA to 10 A range , built-in EIS and many other high-end specifications

HCP-803 Potentiostat

A research-grade electrochemical workstation with the power of an 80 A booster

HCP-1005 Potentiostat

A compact high-current electrochemical workstation - FRA specifically designed to study high-capacity secondary batteries

New BCS-900 Battery Cycler series (recommended)

BCS-900 series is a modular battery cycling system designed to meet the needs at every level of the battery value chain, from R&D to pilot production, from production testing to quality control. Made up of three modular options (BCS-905, 910 and 915), these advanced battery cyclers offer 8 independent channels with a maximum current of ±150 mA, ±1.5 A and ±15 A, respectively per channel.