5 min read
MT-Lab Technical Notes-01: Cell cables and sample holder compensationLatest updated: November 3, 2022
The impedance measurement of a sample or Device Under Test (DUT) using the MTZ-35 can be affected by stray and residual impedances due to cell cables and sample holders if no compensation routine is carried out. Residual impedances can be compensated using the compensation procedure available in MTLab® software. This note explains the principle of cables and sample holder compensation and details how to perform open & short circuit compensation using MT-Lab® software.
MT Lab TN1 Cell cables and sample holder compensation
You cannot access this resource because you are not logged in. Log in