Essential Battery Cyclers - BioLogic

Essential Battery Cyclers.

When aging & screening tests require high volume cell cyclers

The Essential Range is designed specifically for high-volume battery testing facilities. Built specifically for battery screening and aging studies, this instrument delivers focused functionality that optimizes costs without sacrificing the quality standards you expect from BioLogic.

Instruments.

BCS-1012 Battery Cycler series

BCS-1012 series is a modular battery cycling system designed for high-volume aging studies, offering 32 independent channels with a maximum current of ±6 A per channel.

Accessories.

CCH-1

A premium range battery holder using a 4-point connection. The CCH-1 is a premium alternative to the CCH-120 and CCH-124 coin cell battery holders.

PBH-125 / PBH-150

Two versions are available for pouch cell testing, one with a maximum current of 25 A, and another with a maximum current of 50 A. The 4-point connection of these holders allows high-accuracy measurements.

CC4-60A

The CC4-60A is pretty much one half of the CC8. It was specially designed for BCS-815 and is used when 60 A are needed with 4 BCS-815 channels connected in parallel. It can also be used with VMP-300 and VSP-300 boosters.

PBH-4 / PBH-8

4 and 8-channel holders are available for small pouch cells up to 32 A. These holders have 4-point connection allowing high accuracy measurements.

CBH-4 / CBH-8

CBH-4 and CBH-8 are 4 and 8-position battery holders, respectively, dedicated to large and high power cylindrical battery cells.

BH-1i

The BH-1i Battery Holder is a modular accessory for battery test applications, compatible with a wide variety of battery types (coin cells, 18650 and 26650 cells), up to 4 batteries can be tested simultaneously, with a maximum current of 12 A per channel.

CCH-8

The CCH-8 is an 8 position coin holder designed for 20 and 24 mm coin cells, with a maximum thickness of 3.2 mm. Its 4 point connection provides low connection impedance, necessary for accurate AC and DC tests.

PPBH-132 / PPBH-1100

This 4-point measurement single channel holder is available in two versions, depending on the demanded maximum current: 32 or 100 A. Thanks to an adaptable tablet the same holder can be used for prismatic and flat pouch cells.

See all accessories

Related topics.

Battery science: Interactive glossary of terms

What does this battery term mean? A comprehensive, interactive glossary of terms used in battery science

Battery states: State of charge (SoC), State of Health (SoH). Electrochemistry basics series.

Battery States (Charge and of Health) are defined and discussed in this article.

EIS and Battery Screening

Article describing how advanced EIS battery cyclers can play a multipurpose role in battery screening.

How to read battery cycling curves

An overview of how to read cycling curves and their relevance to battery performance/behavior

Need support ?