Learning Center.
An ever-growing source of articles to help you with your research
looking for a specific article?
Search by
Corrosion
Summary of all the corrosion techniques available with BioLogic’s instruments
EC-Lab® solutions for coupling with external devices
This article shows how to integrate, synchronize, and interface BioLogic potentiostats with other devices and instruments using EC-Lab.
How to decode the standard test methods for corrosion?
Corrosion techniques available in EC-Lab in compliance with ASTM and JIS standards.
Impedance of Corroding Metal – Tafelian System
Introduction of the concept of using impedance measurements to analyze corrosion. It focuses specifically on Tafelian corrosion. Learn how to calculate the rate of corrosion, interpret data visually, and relate it to real-world corrosion problems.
Impedance of Corroding Metal – Volmer-Heyrovsky mechanism
Introduction of the concept of using impedance measurements to analyze corrosion. It focuses specifically on Tafelian corrosion. Learn how to calculate the rate of corrosion, interpret data visually, and relate it to real-world corrosion problems.
What is CO2 electrolysis?
Introduction CO2 electrolysis and explaination of CO2 reduction reactions, products from CO2RR and discusses current challenges and prospects.
Get the best EIS measurements, even with longer cables
As an industry leader in Electrochemical Impedance Spectroscopy, BioLogic ensures accurate EIS measurements, regardless of cable length, by compensating for parasitic effect with factory-calibrated cables. Focus on your research, not your setup.
ZFit: How the sensitivity factor can help optimize the equivalent circuit
Sensitivity functions can help you decide if a specific parameter is relevant or not.
Why use RDE and RRDE method to characterize electrocatalysts?
This article explains how BluRev can help you understand electrocatalyst properties using RDE and RRDE methods
How to select the right reference electrode?
Decide which reference electrode is best for your experiment
Introduction to High Throughput Screening
Introduction of high throughput screening and explaination of its advantages compared to iterative testing.
SDC or SECM for high throughput scanning?
Comparison of Scanning Electrochemical Microscopy (SECM) and Scanning Droplet Cell (SDC) for high throughput workstation
What scanning probe electrochemistry platform is best for high throughput screening?
The article explains how to select the best high throughput workstation
M470: An all in one scanning probe electrochemistry software
Everything you need for local electrochemistry in one software
Make life easier with smart limits and automatic I Range
Explaination of new tools available in EC-Lab® V11.50 including I Range in Galvano mode and smart charge limits.
How to automate experiments and build complex protocols: An introduction to the M470 sequencer
Automating experiments, and writing complex protocols with the M470 sequencer.
Take your experiments ‘To Go’ with EC-Lab®
Unlock the true potential of your electrochemical experiments with wireless connectivity.
Which SCAN-Lab software should I use?
Information on when to use the different BioLogic software available for scanning probe electrochemistry.
EC-Lab®
The stand-out potentiostat interface that just keeps getting better
How to access electric variables in EC-Lab®
EC-Lab® software allows access to the complex representation of the electrical variables obtained from electrochemical impedance measurements on ionic conductors.
ZFit: How to have confidence in results using std err.?
Explaination of the significance of the std err. parameter in ZFit, the EIS fitting tool in EC-Lab.
What is AC Voltammetry? Introduction to technique principles
Understand the key principles of alternating current voltammetry (AC Voltammetry)
ZSim and ZFit as learning tools. Part V – How to choose the proper equivalent circuit?
Tips, tricks and general guidance for choosing the proper equivalent circuit.
ZSim and ZFit as learning tools. Part VII – Equivalent circuits identifiability
Explaination of the identifiability and unidentifiability properties of equivalent circuits
ZSim and ZFit as learning tools. Part VI – Equivalent circuits distinguishability
Explaination of the distinguishability properties of equivalent circuits
Guidelines for proper Electrochemical Noise (EN) measurements
How to properly perform EN measurements with BioLogic products.
Corrosion basics: DC electrochemical characterization of a corrosion system
Description of a simple method for the determination of the potential and corrosion current of a uniformly corroding electrode based on the Stern or Wagner-Traud relationship.
What is a Frequency Response Analyzer (FRA)?
What is a Frequency Response Analyzer, what is its principle? This article details key information about FRA.
What is a potentiostat and its use in Science & Industry (Electrochemistry Basics Series)
What is a potentiostat? An article detailing every aspect of this versatile electrochemical multitool. Covers Potentiostat functionality and operation, the history of the potentiostat, uses and applications and the future of the potentiostat
Need support?
