5 min read
Electrochemistry Instrument catalogLatest updated: September 15, 2020
BCS-800 series is a modular battery testing system designed to meet the needs of every level of the battery value chain, from R&D to pilot production, from production testing to quality control. Made up of three core products (BCS-805, 810 and 815), these advanced battery cyclers offer 8 independent channels with a maximum current of ±150 mA, ±1.5 A and ±15A, respectively per channel.
The MPG-200 series is a high-end battery tester series made of two core configurations. The MPG-2 features 16 independent channels at 100 mA, whereas the MPG-205 offers eight 5 A channels. Both MPG battery cyclers are available with or without EIS capabilities.
A compact temperature chamber enabling temperature control from - 35 °C through to + 150 °C. The device has been designed to accommodate Bio-Logic sample holders such as leak-tight sample holders (CESH).
An impedance analyzer with the features and specifications necessary for working on a the broad range of applications in the field of materials research.
A laboratory furnace used specifically for the electrical characterization of materials and also for heat treatment between ambient temperature and 1100 °C.
The perfect electrochemical workstation for corrosion with the 100 fA accuracy ultra-low current option
User-friendly electrochemical workstation designed to address general electrochemistry & corrosion applications amongst others
A powerful, research grade, potentiostat offering a current range of up to 4 Amps.
Based on a modular chassis, this potentiostat can be customized to address every possible application in the field of classical electrochemistry.
A state-of-the-art research grade potentiostat with a 500 mA to 10 A range , built-in EIS and many other high-end specifications
A versatile potentiostat capable of generating any bipot measurement, such as Rotating Ring Disk Electrode (RRDE) and InterDigitated Array (IDA) electrodes.
Perfect for group working the VSP-300 electrochemical workstation can be connected to a LAN and controlled independently by multiple users
Includes low current measurement, impedance and high current capability via plug-in modules.
EIS capability up to 7 MHz and ultra low current sensitivity with the ULC option
Ultra Low current (down to aA resolution)
Lowers the base current range from 1 μA to 1 pA, making the resolution of the low current option is 80 aA on the 1 pA range.
A booster pack designed specifically for battery pack characterizations. Continuous maximum current of +/-30 A extendable by +/-120
A compact high-current electrochemical workstation - FRA specifically designed to study high-capacity secondary batteries
FlexP0160 & FlexP0060
A powerful booster suitable for Redox Flow Batteries (RFB) or fuel cell stacks.
Additional module providing voltage scans of up to 1 MV/s with an acquisition time down to 1 μs.
SVET/Vibrating Probe – M470
SVP is a technique often exploited by researchers to investigate corrosion processes. For corrosion it is often referred to as SVET. SVET has been used extensively to look at the effect of exposure time on the corrosion processes occurring in real time.
SKP – M470
SKP sensitively measures changes in sample work function related to surface state changes
A modular, state-of-the-art instrument allowing users to exploit 9 local electrochemistry techniques.
LEIS – M470
Used extensively for research in coatings and corrosion. LEIS is of particular use for measuring the impedance of coated samples.
Compact SECM built for high-resolution imaging, x,y stages are fully separated from z stage to reduce crosstalk
OSP – M470
The Optical Surface Profiler option of Bio-Logic’s modular M470 scanning electrochemical workstation.
ic-SECM – M470
The constant distance Scanning Electrochemical Microscopy variant of Bio-Logic’s modular M470 scanning electrochemical workstation
ac/dc-SECM – M470
A versatile technique that can be used in a wide variety of applications including: materials research, catalysis, battery research and many others...
ac/dc-SDS – M470
The SDS470 is perfect for any conducting or semi-conducting sample. Because the technique is centred on a confined, local electrochemical cell, it can potentially be used for applications in a wide variety of fields from sensors to catalysis
16 channel electrochemical workstation with 1 A (extendable to 800 A) current capability as well as EIS Quality Indicators. Perfect for battery research & testing
Eight channel potentiostat / galvanostat with +/- 1A (expandable up to 800A); Ethernet connectivity, Built-in EIS
BluRev is a range of robust, versatile, rotating disk (RDE) and rotating ring-disk (RRDE) electrodes ideal for use with BioLogic potentiostats. A range of quick-fit exchangeable electrode tips (multiple materials/diameters) can be easily added.
The BluQCM QSD is a single channel, compact and modular instrument. Its low footprint and lightweight makes it particularly suitable for crowded labs. It is available as standalone, with temperature control or/and flow control.
booster designed specifically for electrolyzer/fuel cell characterizations with a continuous maximum current of +/-200 A for a single unit extendable up to +/-800 A by connecting four units in parallel
The SP–150e is the only ampere capable workstation to boast high-current capability (800 A with boosters), three EIS quality indicators (THD, NSD, NSR) for EIS validation and Ethernet compatibility for improved group-working.