ic-SECM101: An Introduction to Intermittent Contact-Scanning Electrochemical Microscopy
An overview of Intermittent Contact-Scanning Electrochemical Microscopy
Analytical electrochemistryResearch electrochemistry
Learning Center.
An ever-growing source of articles to help you with your research
The RRDE as a pH probe in situ
The Rotating Ring Disk Electrode (RRDE) Ring can be used as a potentiometric or amperometric in situ pH probe. This is extremely useful to study electrochemical reactions that involves OH- or H+ ions.
Analytical electrochemistryResearch electrochemistry
Effect of the staircase on current sampling.
The effect of the staircase on current sampling
Energy storage and conversionResearch electrochemistry
Checking and validating reference electrodes (Electrochemistry basics series)
The reference electrode is part of the 3-electrode setup. A bad reference electrode can impact negatively on measurements. In this article, we discuss the protocol necessary to check reference elec...
Analytical electrochemistry
The electrical conductivity of solid electrolytes
The efficiency and performance of energy storage devices depend on the electrical properties of the materials used for the anode, cathode and for the electrolyte.
Materials science
Sub-10 ms stopped-flow in the mid-IR
Obtain very fast reaction speeds by combining stopped flow with dual comb spectrometers.
Life sciencesRapid kineticsSpectroscopy
Carbon nanotubes & water purification. Exciting new opportunities
Access to clean water is a major global problem and a key health concern worldwide. This article concerns research using carbon nanotubes as part of the desalination process.
Life sciencesRapid kinetics
Investigation of impedance measurements using the Z Sim tool (Electrochemistry Basics Series)
To adjust the frequency range of your EIS experiment or just to see the shape of your model, Z Sim is available on both EC-Lab® and BT-Lab® software.
Energy storage and conversionResearch electrochemistryMaterials science
Ohmic drop correction: a means of improving measurement accuracy
The effect of the ohmic drop on electrochemical measurements and methods for its correction.
Analytical electrochemistryCorrosionResearch electrochemistry
Nyquist plots: Why use the orthonormal scale?
This article illustrates why the orthonormal scale should be used for Nyquist impedance plots.
Energy storage and conversionResearch electrochemistryMaterials science
