Coin Cell Holders.

Everything you need to test your coin cells

A wide range of holders is available: for single coin cell, for and 8 simultaneous measurements. Single holders are available with BCS-805 and BCS-810 only, while 4 channel coin cell testers are compatible with MPG2 and VMP3 only. The 8-channel coin cell testers are compatible with BCS-800 Series, MPG2 and VMP3.

Accessories

CCH-1

A premium range battery holder using a 4-point connection. The CCH-1 is a premium alternative to the CCH-120 and CCH-124 coin cell battery holders.

CCH

This simple coin cell holder allows to test simultaneously 4 coin cells. It is compatible with MPG2 and VMP3 multichannel potentiostat/galvanostat. 4 of these are needed reach 16 simultaneous experiments.

CCH-120/CCH-124

These easy-to-use single coin cell holders are available for two coin cell diameters : 20 and 24 mm. The maximum thickness of the coin cells that can be held is 3.2 mm.

CCH-8

The CCH-8 is an 8 position coin holder designed for 20 and 24 mm coin cells, with a maximum thickness of 3.2 mm. Its 4 point connection provides low connection impedance, necessary for accurate AC and DC tests.