QCA922A

QCA922A

Essential product for mass change detection.

The Quartz Crystal Analyzer 922A is our entry level QCM for basic applications, requiring no measurements at overtones, or temperature control.

The instrument monitors both the resonant frequency and the resonant resistance, which are also reflected on the two analog outputs. It is possible to connect the QCM device to a Bio-Logic potentiostat using a DB9‑8BNC cable (catalog n°: 092‑22/1).

Specifications and ordering information

 

QCA922A
Frequency range 1 MHz -30 MHz,
resolution 0.1 Hz
Resonant resistance range 10-16 Ω,
resolution 0.1 Ω
ΔF Output full scale: ± 10 V (12 bit)
± 200 Hz / ± 2 kHz /
± 20 kHz / ± 200 kHz
Resistance Output full scale: 0-10 V (11 bit)
1 / 2 / 4 / 8 / 16 kΩ
Gate time variable (10 ms, 20 ms, 0.1 s, 1.0 s, 10.0 s)
Display 40 Digits x 2 rows
Interface IEEE-488, RS-232C, USB
Size 260 x 88 x 230 mm
Weight 3.3 kg
Temperature 0 – 40 °C
Power consumption 100-120 V AC,
230-240 V AC,
50-60 Hz, (15 W)

 

  Catalog No.
Quartz crystal microbalance 27 MHz kit SE-QCA922A
Contents
EQCM 27 MHz main unit with cable SE-QCA922A-00
Male BNC/BNC cable (2 pieces, length 1 m) COR28100

 

Options  Catalog No
Holder is needed to get
a full QCM or EQCM set-up

 

 

static and flow QCA cell 092-QCA-FC*
dip cell SE-CL3
well cell SE-CL4
transparent well cell SE-CL5
flow cell (90 µL) SE-CL7 is transparent SE-CL6/SE-CL7
Connector from QCA to potentiostat 092-22/1
Low flow peristaltic pump EL-AV-008

*Compatible with A-002222 et A-002233 as CE et A-012167 as RE.

 

Quartz crystals
        Catalog No.
Resonators 5 MHz f0 = 5 MHz

(calibration at 5 MHz at factory with no charge when purchased)

gold electrode (25 pieces) SE-5AU
Resonators 9 MHz

f0 = 9 MHz

Standard finish

 

 

 

 

 

 

 

 

 

Resonator

and lead wire

 

 

 

 

 

 

aluminum electrode (25 pieces) SE-9AL
gold electrode (25 pieces) SE-9AU
graphite electrode (25 pieces) SE-9C
cupper electrode (25 pieces) SE-9CU
molybdenum electrode (25 pieces) SE-9MO
nickel electrode (25 pieces) SE-9NI
platinum electrode (25 pieces) SE-9PT
stainless steel (SUS304) electrode (25 pieces) SE-9SS
Separated lead wire gold electrode (25 pieces) SE-9AU-S
platinum electrode (25 pieces) SE-9PT-S
Mirror finish

 

 

 

 

 

 

 

 

 

 

 

 

 

Resonator and lead wire

 

 

 

 

 

 

 

 

 

aluminum electrode (25 pieces) SE-9AL-M
gold electrode (25 pieces) SE-9AU-M
gold electrode (20 * 25 pièces) SE-9AU-M2
graphite electrode (25 pieces) SE-9C-M
cupper electrode (25 pieces) SE-9CU-M
ITO electrode (25 pieces) SE-9IT-M
nickel electrode (25 pieces) SE-9NI-M
platinum electrode (25 pieces) SE-9PT-M
silicon electrode (25 pieces) SE-9SI-M
stainless steel (SUS304) electrode (25 pieces) SE-9SS-M
titanium electrode (25 pieces) SE-9TI-M
Separated lead wire

 

gold electrode (25 pieces) SE-9AU-MS
ITO electrode (25 pieces) SE-9IT-MS
platinum electrode (25 pieces) SE-9PT-MS

 

Others  Catalog No
Resonators lead wire no sputter (50 pieces) SE- LEAD/2
Resonators 9 MHz, no sputter no lead wire (50 pieces) SE- 9Q/2
mirror finish no lead wire (50 pieces)  SE- 9Q-M/2

 

Surface finishing
  Roughness/µm Electrode materials deposition
Standard finish 0.6 µm sputtered
Etching finish 0.6 µm vacuum deposition
Mirror finish 0.06 µm sputtered
Polish finish 0.06 µm vacuum deposition

 

 

Request a quote.

Our team is ready to help

Contact us