Flow spectroelectrochemical cell

Optical paths from 0.1 to 0.5 mm

This flow spectrelectrochemical cell allows to perform flow injection or stopped flow analysis with thin layer cells ranginf from 0.1 to 0.5 mm.

The spectroelectrochemical flow cell offers different path lengths by changing the inner silicone gaskets. Those are available with thickness ranging from 0.1 to 0.5 mm. This flow cell can be connected to a variety of optical fiber type spectrometer by setting the optional collimating lens. Many different materials are offered for the working electrode: ITO (Indium Tin Oxide), and as grid electrodes Pt, Au or carbon. Various reference electrodes can be used depending on the application: RE-3VT for aqueous electrolytes and RE-7VT for non-aqueous electrolytes.

Specifications and ordering information

  Quantity Catalog No
SEC-2F spectroelectrochemical flow cell A-012660
SEC-2F flow cell

(base, cover, block A, block B)

SEC-2F S500 silicone gasket 2 A-012661
Stainless tube OD 1/16″ (50 mm) 1 A-012198
Needle adaptor 1
Dynaseal PEEK fingertight 2
Silicon tube (30 cm) 1
PTFE tube (1 m) 1



Optional Catalog No
Reference electrode

screw type

Ø 10 x 55 mm RE-3V aqueous A-012169
RE-3VP aqueous (PEEK) A-012170
RE-7V non aqueous A-012173
Working grid electrode

for flow cell

8 x 27 x 1 mm Pt grid electrode (1 piece) A-012655
Au grid electrode (1 piece) A-012656
carbon grid electrode (1 piece) A-012657
ITO electrode (4 pieces) A-012658
8 x 27 x 0,5 mm ITO electrode (12 pieces) A-011465
10 x 20 x 0,5 mm ITO electrode (10 pieces) A-010887
10 x 10 x 0,5 mm ITO electrode (30 pieces) A-011233
Ø 4 inch x 0,5 mm ITO electrode (1 piece) A-011827
Gasket silicone S500, 500 µmt (4 pieces) A-012661
PTFE T500, 500 µmt (4 pieces) A-012664
T250, 250 µmt (4 pieces) A-012665
T100, 100 µmt (4 pieces) A-012666
Fiber and lens 400 µm optical fiber SR, 25 cm A-012667
400 µm optical fiber SR, 2 m A-011522
UV/VIS collimating lens, 200-2000 nm A-012234


Request a quote.

Our team is ready to help

Contact us