Controlled Environment Sample Holder
The Controlled Environment Sample Holder (CESH) is a parallel plate sample holder dedicated to electrical characterization of flat material samples in the temperature range between -40 °C and 150 °C.
An innovative, multi-use sample holder for material characterization
The Controlled Environment Sample Holder (CESH) is a parallel plate sample holder dedicated to the electrical characterization of flat material samples in the temperature range between -40 °C and 150 °C.
The CESH comes in two models: In-plane CESH and Through-plane CESH. The “Through-plane” model is dedicated to the measurement of an electrical parameters in a direction perpendicular to that of the plane of the sample, while the “In-plane” model is more dedicated to the measurement of electrical parameters in directions parallel to that of the plane of the sample.
The CESH allows accurate four-point impedance measurements with the MTZ-35 impedance analyzer and also with Bio-Logic potentiostats/galvanostats with the EIS option.
Each CESH model is equipped with two ports for the gas inlet and the outlet for inert or active gas flow. An oxygen and moisture-sensitive sample can be prepared inside a glove box, placed in the CESH and then installed in the ITS temperature Control System for electrical characterization.
|Size||D 79 x H 94 mm (121.90 clearance)|
|Temperature range||-40 °C to +150 °C|
|HF connection||SMB (4-point)|
|Gaz inlet / outlet||ID 02 mm / OD 04 mm|
|Frequency range||DC to 35 MHz|
|DC range||up to 120 V|
|Electrode material||Gold plated|
|Electrode baseplate||D 47 mm|
|Sample thickness||Up to 5 mm|
|Sample diameter||Up to 27 mm|
|Ordering information||In-plane Sample Holder 097-150/1
Through-plane Sample Holder 097-150/2
Review and principles of conductivity measurement – Material Science – Application Note 2
Electronic conductivity measurement using DC and AC method – Material Science – Application Note 3
You may want to complete your set-up with.